+8615280858852
Snap Button Pull Tester is used to measurement of the uniform force applied to the snap attachment shall be recorded by means of a force-measuring device, to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester applies for compression and tensile testing of small samples (special attachments are available). The main technical parameters Sample force: 90N Test time: 10 seconds Do you want to know more about the Snap Button Pull Tester? Included Standard Accessories IMADA Force Gauge FB-30K (300N, Resolution 2N, Accuracy +/-1%FS) ATB04 Universal Upper Grip ATB07 Upper Stud Clamp ATB06 Long Nose Vise Grip ATB33 Seam Clamp ATB12 Three Pronged Clamp Lowe Grasp Button Accessory Kit Lowe Fabric Clamp & Level Arm Locking Calibration Weight 15LB Rubber band (Universal upper grip vulnerable parts) Option Accessories Multifunction vise clamp ATB01 Small Part cylinder Goggles More about Snap Button Pull Tester please click: https://www.avenotester.com/snap-button-pull-tester-ag03_p13.html Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
read more
1.Installation space requirements 2. Installation condition 2.1Working environment requirements 2.1.1 The best operating environment for the Fabric Pilling Tester is the ambient temperature and humidity between 10℃～30℃ and 70%RH. 2.1.2 There is no vibration in the surrounding environment, no corrosive, flammable, explosive medium, no strong electromagnetic interference, and a well-ventilated place. 3. Equipment acceptance During transportation, the Random Pilling Tester is best placed in a vertical manner, please don’t lie down. After unpacking the instrument, check the Random Tumble Pilling Testing machine and accessories according to the packing list. If there is any damage or missing, please notify the company in time so that we can deal with it in time. *Note: Please keep the random information and accessories properly. 4. Instrument installation 4.1 Instrument placement Place the instrument on a stable test bench. After placing it, adjust the feet to place the instrument horizontally and ensure that the four feet are evenly stressed. 4.2 Air source installation Connect the air source at the air source interface of the pressure regulating valve as shown in the figure, and adjust the pressure regulating valve to make the air pressure 0.3MPa. AVENO Machine Recommend: AG15 Random Tumble Pilling Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
read more
Before leaving the factory, all our instruments can be shipped after a second debugging and testing. After the production is completed, they can be put into storage after debugging and quality inspection. Before shipment, we will conduct a second inspection and confirm that they are correct before shipping. The following is the test before delivery of AY12B-Full-Automatic Yarn Evenness Tester. After repeated testing by technicians and quality inspectors, it can be shipped. AVENO Machine Recommend: AY12B-Full-Automatic Yarn Evenness Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com Our main products including: 1.Textile Testing Equipment(including Fabric tester. Yarn tester Fiber tester.etc.) 2.Footwear Testing Equipment(including Shoe tester.Leather tester.Rubber tester.etc.) 3.Children Products Testing Equiment(including Toy tester.electronic toy tester.etc.)
read more
Shoes lining seepage tester used to test the waterproof function of rubber-faced, rubber shoes and shoes lining. The fixtures are made of SUS stainless steel, which will not rust during long-term contact with water. Two-station current test, dual foot switches control left and right clamps, convenient operation, high work efficiency and accurate test. Operating specifications Of Shoe Lining Leakproof Testing machine Description of control panel: 1. Left pressure adjustment: used to adjust the air pressure required by the left clamp group. 2. Left air valve: It is used to open and close the left clamp if it needs to be inflated. If only the right clamp is used, close the left air valve. 3. Power source: The main power switch is used to control the operation of the entire machine. 4. Left clamp work: used to control the clamping or releasing action of the left clamp, press to clamp, press up to release. 5. Left air pressure: display the current inflation pressure status of the left fixture group. 6. Immersion time: used to set the test time of the sample. 7. Right air pressure: display the current air pressure status of the right fixture group. 8. Right air valve: It is used to open and close the right clamp if it needs to be inflated. If only the left clamp is used, close the right air valve. 9. Right pressure adjustment: used to adjust the air pressure required by the right clamp group 10. Right gripper work: used to control the clamping or loosening action of the right gripper. Press the sock once to be clamped, and press the gripper again to loosen it. 11. Lowering work: used to control whether the left and right clamps are lowered into the water. 12. There is a general voltage regulating line on the back of the unit, and make necessary adjustments when needed. Operation steps: A: Turn on the power. 1. Before use, carefully check whether the various parts of the machine are normal, and confirm that the oil is injected on the surfaces of the upper and lower pillars on both sides to make it lubricated normally (oil injection time 1 time/day) and prepare to start; 2. Connect the air source, open the "air pressure valve" and use the "left and right pressure regulator" to adjust the required air pressure and adjust the "water immersion timing"; 3. Press the "power" switch, and the "power light" and "landing light" are on at this time. After the set time is reached, the main cylinder immediately drives the support rods on both sides to brake and rise to the limit; 4. Place the test piece in the middle of the clamp, turn on the working switches of the left and right clamps, and clamp and seal the test piece; 5. Rotate the left and right air pressure valves to the right, the sock will be inflated to the set pressure; 6. Press the "descent work" button once, and the fixture will bring the test piece into the water of a fixed depth for testing. When it is immersed for the specified time, the two fixtures will automatically take the test piece out of the ...
read more
The color of the laboratory is different. Is there any difference between the morning sunlight and the afternoon sunlight? For printing and dyeing factories, choosing the source of light is a very important thing! Standard light source operating parameters The standard light source color-matched light box is usually a combination of multiple light sources. It helps users provide simulated sunlight D65, D50, simulated shop showroom lighting TL84, CWF, U30, and home lighting F, INCA, horizontal sunlight HORIZON, For ultraviolet lamps, UV, etc., the corresponding parameters of each light source are not the same. Light source name Color temperature（K） Tone RGB Explanation A 2856 Incandescent lamp/tungsten B 4874 Direct sunlight at noon C 6774 Average/North Sky Daylight D50 5003 Light on the horizon D55 5503 Morning/afternoon daylight D65 6504 Noon Sun: TV, sRGB color space D75 7504 North sky daylight E 5454 Equal energy F1 6430 Daylight Fluorescence F2 4230 Cool white fluorescence F3 3450 White fluorescence F4 2940 Warm white fluorescence F5 6350 Daylight Fluorescence F6 4150 Lite white fluorescent F7 6500 D65 simulator, daylight simulator F8 5000 D50 Simulator, Forest City F40 Design 50 F9 4150 Cool white luxury fluorescence F10 5000 Philips TL85,Ultralume 50 F11 4000 Philips TL84,Ultralume 40 F12 3000 Philips TL83,Ultralume 30 A light source: The color temperature is 2845K, which is equivalent to the light radiated by the incandescent lamp at 2800K. Light source B: The correlated color temperature is 4800K, which is equivalent to direct sunlight at noon. C light source: The correlated color temperature is 6700K, which is equivalent to the natural light during the day, and it has more blue components. D65 light source: The correlated color temperature is 6500K, which is equivalent to the average daylight. In recent years, it is often used as a standard light source for color TVs. E light source: also known as isoenergetic white light, that is, P(l)=constant. It is a hypothetical light source that does not actually exist. It is used purely to simplify calculations in chromatics, and its correlated color temperature is 5500K. F series illuminants represent various types of fluorescent lighting. Different color temperature, different light color Color temperature Light color Feel <3000K Warm (reddish white) Steady and warm 3000－5000K Middle (white) Readily >5000K Cool type (white with blue) Cold The color is usually observed in daylight, so the fine color discrimination in industrial production requires that the lighting source must have a spectral power distribution that approximates real daylight, that is, the D65 standard light source specified by CIE, and the D65 standard light source light box is also a large market demand. A color light box. AVENO Machine Recommend: AC07 Color Matching Cabinets Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotes...
read more
Why should we evaluate the rubbing color fastness of the fabric? When people wear clothing, the fabric and the lining will produce friction; various spliced parts will also produce friction; when relying on objects, it will also produce friction; these frictions are likely to be due to the color fastness of the friction of the fabric. The color shift will affect the appearance of the clothing. Therefore, the rubbing color fastness test is listed in GB 18401 "National Textile Basic Safety Technical Specifications" as a basic technical requirement is reasonable. Now that the color fastness to rubbing is so important, as a professional testing agency or professional testing personnel; we should have a deeper understanding of the color fastness to rubbing test to make our test results close to the true values of the samples. Common standards for rubbing color fastness test: Chinese standard： GB/T 3920 International Standard： ISO 105 X12/X16 American standard： AATCC 8/AATCC 116 Japanese Standard： JIS L0849 Type I /Type II Other national standards are not often used, and standard numbers are not listed here, just to popularize the national standard prefixes. EN EU BS United Kingdom CAN/CGSB Canada AS Australia DIN Germany NF France Commonly used equipment for rubbing color fastness test: AC04 AATCC Electronic Crockmeter AC04-2-AATCC Electronic Crockmeter AC04-3 AATCC Electronic Crockmeter AC05 AATCC Crockmeter(Rubbing Fastness Tester) AC05B AATCC Crockmeter Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
read more
In life, most people choose to send valuable clothes to dry cleaning. They think that dry cleaning can not only wash away stains, but also keep the clothes beautiful. However, in actual life, the dry cleaning of the clothes may also cause discoloration or staining of light parts. Today, we will work together to understand the test methods for fastness to dry cleaning and the product standards for common clothing to assess the fastness to dry cleaning. What is dry cleaning? Dry cleaning refers to the washing of clothes with organic chemical solvents, including a dry and dry washing method that removes oil or stains. Color fastness to dry cleaning Common methods for testing the color fastness of dry cleaning in the laboratory are: GB/T 5711-2015 "Textile fastness test for color fastness to dry cleaning of tetrachloroethylene" ISO 105 D01:2010 "Textile—Tests for colour fastness-Part D01:Colour fastness to drycleaning using perchloroethylene solvent" Experiment procedure The above two standard test methods are the same, and the test steps are as follows: Step 1: Increase the water temperature of the water bath in the mechanical device to a test temperature of 30 °C. Step 2: preparing a combined sample, the sampling size is 40 mm × 100 mm. The test object can be a garment, a fabric, a yarn or a loose fiber. Step 3: Stitch two undyed square cotton twills along three sides to make a bag with an inner dimension of 100mm×100mm, and put a combined sample and 12 stainless steel wafers into the bag for any convenience. The form of the closed pocket. Step 4: Place the bag containing the combined sample and the stainless steel disc in a stainless steel container. Step 5: Add 200 mL of tetrachloroethylene to a stainless steel container (at a temperature of 30 ° C) in a fume hood. Step 6: Cover the stainless steel container, put it into the mechanical device, start the operation, and treat it in a water bath at 30 ° C for 30 min. Step 7: Take out the bag from the container, take out the sample, squeeze or centrifuge to remove excess solvent, and hang the sample in a ventilator for drying. Step 8: The original sample and the original lining fabric are used as reference samples, and the discoloration of the sample and the staining of the lining fabric are evaluated by a gray sample card or instrument. AVENO Machine Recommend: AC10 Water Colour Fastness Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
read more
Mouth-actuated Toys Endurance Tester is used to test the safety performance of mouth-actuated toys. The Mouth-actuated Toys Endurance Tester blows out and inhales a certain volume of gas of the toy at a certain speed for 10 times. After testing, determination if the toy and the parts spliting away off are small parts. Standards EN-71-1 section 8.17.2 ISO 8124-1 section 5.20 ASTM F963 section 8.13 GB 6675.2 section 5.20 AVENO Machine Recommend: AT26 Mouth Toy Endure Tester (Mouth-actuated Tester) Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
read more
Fabric Air Permeability Tester is used to determine the air permeability properties of fabric, suitable for many kinds of textile fabrics, including industrial fabrics, textile products such as non-wovens and other breathable materials. Feature Use high-precision pressure and differential pressure sensor detection to ensure accurate data. Microcomputer processing, direct display test results, no need to manual table checking and calculation. Built-in continuous test mode, the testing unit can be switched according to need. can be operated online with the computer host computer, automatically draw real-time test data curve, easy to observe. We have two model, AG18A and B, AG18A is manual change nozzle, AG18B can automatic change nozzle, you can choose what you prefer. AVENO Machine Recommend: AG18A Digital Air Permeability Tester AG18B Automatic Air Permeability Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
read more
Toilet Paper Dispersibility Tester is used for toilet paper dispersibility test, simulate the force of paper and products in the toilet, observe whether it can be dispersed within the specified time, or determine the time required for dispersion, the tester consists of a cylinder, a rotor, a motor and a gas flow meter.
read more
AAA+ rated commercial tumble dryer designed for veterinary use unlike domestic machines. Having an on-premises laundry is the most cost effective and easy way to manage laundering your items to control cross infection.
read more
Hydrostatic Head Pressure Tester is used to test the water pressure of waterproof clothing series, raincoat series, tent series, waterproof bag series, waterproof gloves series and other products under a certain pressure.
read more
Precision Low-temperature Freezer use to determining the adaptability test of components and materials of electrical, electronic, aerospace, automotive electrical, materials and other related products, as well as various electronic components and related products, when stored and used in low temperature and constant temperature environments, to test their various performance indicators.
read more
Formaldehyde Test Chamber suitable for the determination of formaldehyde emissions from various indoor decorative materials such as artificial boards and composite wooden floors, as well as the constant temperature and humidity balance treatment of wood or artificial boards.
read more
Nov 18, 2024Clothes may be damaged to varying degrees during the washing process, such as the following situations. These situations can remind everyone to control the production process to avoid similar situations. 1. Changes in printed clothes after washing: Color bleeding, Fading, Loss of print integrity, Rubber deformation & aging 2. Fabric color transfer after washing During the washing process, fabrics of different colors penetrate each other, causing color confusion and color blending. This usually happens more often with clothes with sharp color contrasts. For example, the following situations all show obvious color blending after washing. 3. Clothes with accessories are also prone to varying degrees of damage after washing: 1) Accessory damage • Deformation • Fading • Surface wear 2) Problems with the connection between accessories and clothing • Looseness • Falling off 3) Problems with the garment itself • Deformation • Stain transfer or stain transfer These situations are the nodes that fabric and clothing manufacturers need to focus on during the production process. Therefore, relevant testing instruments are needed to analyze textile fabrics and screen out high-quality fabrics to serve the market. 1. Automatic Wascator Shrinkage Tester AC13 2. Shrinkage Template And Ruler AC15 3. Wash Colour Fastness Tester AC10 Anything inquiry please contact us as below: AVENO technology co., ltd. Email: sales@avenotester.com
Oct 01, 2024According to the national holiday regulations and the actual situation of the company, our company will be on holiday from October 1 to October 5, and will resume work on October 6. If you have any consulting business or other urgent needs during the holiday, please contact our on-duty service staff. The whole country celebrates the National Day. Thank you for your strong support and cooperation to AVENO. Let us accompany you every day with the most sincere blessings! Wish you: all the best, all your wishes come true, and a harmonious family brings prosperity! Sincerely, AVENO TECHNOLOGY CO., LIMITED Email: sales@avenotester.com
Sep 15, 2024AVENO wish you have a happy Mid-Autumn Festival. AVENO will have a holiday to celebrate the Mid-Autumn Festival, providing our team with a holiday time to celebrate the Mid Autumn Festival and get together with their families to celebrate the festival. We apologize for any inconvenience caused to our customers and friends. Duration: The Mid-Autumn Festival holiday will start on September 15, 2024 and end on September 17, 2024, for a total of 3 days. During this period, if there is any work or if there is a delay in responding, we apologize in advance. In case of emergency, we will send colleagues to provide you with timely assistance. AVENO wish you and your family good work, good health and happiness every day. Sincerely, AVENO TECHNOLOGY CO., LIMITED
Aug 29, 2024With the rapid changes of the times, the detailed and rapid changes in consumer demand have received increasing attention. Therefore, the textile manufacturing industry needs to continuously upgrade and optimize its products according to changes in consumer demand. Textile testers can provide valuable reference data and quality control in the textile manufacturing process, playing an important role. AVENO, as a textile tester manufacturer, is based on market demand and focuses on strengthening the quality control of textiles, the user experience of laboratory personnel, and meeting the different needs of consumers, and continuously optimizing and improving our textile testers. 1. Optimize the instrument from the aspect of textile quality control: Textile testers play a vital role in quality control in various links such as fibers, yarns, fabrics, and textile finished products. The instrument provides comprehensive test data support for textile manufacturers to evaluate the properties of fabrics, including the stability of textile materials such as tensile strength, tear resistance, and elongation. Through rigorous testing, the quality of textile materials can be predicted, helping manufacturers to provide consumers with guaranteed products. 2. Optimize instruments from the perspective of efficiency and cost control of textile manufacturers: Textile testers help improve product manufacturing efficiency and manufacturing costs. By accurately testing materials, the failure rate of production can be reduced, thereby minimizing material waste, improving production efficiency, and saving material costs. As a textile tester manufacturer, we recognize the indispensable role that testing instruments play in the textile manufacturing industry. We will continue to optimize our products to help textile manufacturers better produce high-quality products that meet consumer needs and serve everyone. AVENO products including: 1. Textile Testing Equipment 2. Yarn & Fiber Testing Equipment 3. Footwear Testing Equipment 4. Toy Testing Equipment Anything inquiry please contact us as below: AVENO technology co., ltd. Email: sales@avenotester.com
Aug 06, 2024The Olympic Games are in full swing. The 2024 Olympic Games will be held in Paris, France, and will open on July 26, 2024, local time. As an important sports event that connects the world, AVENO organizes and encourages its employees to watch the Olympics and discuss the Olympics from the perspective of corporate management. While watching the Olympics, our team members put forward several valuable lessons learned, and discussed them together to promote AVENO to a higher level: 1. Efficient teamwork Efficient teamwork is one of the winning forces of the Olympics. Many events require the cooperation of athletes to achieve victory. At the same time, athletes from different backgrounds gather together to compete, which also reflects the friendship between our different countries and demonstrates the power of collaboration and collective efforts. Similarly, in the operation and management of our enterprises, we also need mutual cooperation among employees, complement each other, promote the progress of the enterprise, and go out to learn from peers and external enterprises. 2. Set a vision and have a common goal Any success of the Olympic team on the field is achieved by setting a clear vision and aiming at the goal. Before the start of the Games, repeated training, strategy adjustment, and discussion are needed to jointly set a common goal, so that the athletes can move forward bravely on the field. Similarly, in our corporate management, we also need to hold the same vision of the company and work hard to make AVENO better and better. 3…… All employees expressed their opinions and spoke one after another. I learned a lot from watching the Olympics. AVENO Instruments, located in Quanzhou city of China, was founded in Hongkong in 1998. In the past 30 years, we have been deeply involved in the field of test instruments. Based on the user experience, we have continuously upgraded our machines to make the user experience more convenient, efficient and the data more accurate. After combining the various understandings of the Olympic Games, our employees believe that we will make our machines better and better. AVENO products including: 1. Textile Testing Equipment 2. Yarn & Fiber Testing Equipment 3. Footwear Testing Equipment 4. Toy Testing Equipment Anything inquiry please contact us as below: AVENO technology co., ltd. Email: sales@avenotester.com
Jun 27, 2024The lasting vividness of clothing colors makes textiles visually attractive and expressive, so maintaining the color fastness of clothing is of vital importance. Color fastness refers to the ability of textile materials to maintain their original color under various conditions, including washing, friction, light, sweat, etc. Color fastness testing can help manufacturers screen and evaluate the quality and life of products. Good color fastness means that textiles are not easy to fade during post-processing or use; poor color fastness means that the color will fade, slightly discolor, or stain, causing a lot of trouble. Several common color fastness of textiles: 1. Light Fastness Sunlight fastness refers to the discoloration of colored fabrics under the influence of sunlight. It is mainly measured by simulating the fading degree of the sample after exposure to sunlight, and then comparing and rating it with the standard color sample to evaluate the quality of the fabric according to different grades. Fabrics with poor sunlight fastness should not be exposed to the sun for a long time. It is recommended to dry them in a ventilated place. 2. Sublimation fastness Sublimation fastness refers to the degree of sublimation that occurs when dyed fabrics are stored. Sublimation fastness uses a gray grading scale to assess the discoloration, fading, and staining of white cloth after dry heat pressing. There are 5 levels, with 1 being the worst and 5 being the best. Generally, 3-4 levels are required to meet the needs of wearing. 3. Rubbing Fastness Rubbing Fastness refers to the degree of color fading of dyed fabrics after rubbing, which can be divided into dry friction and wet friction. The degree of color fastness to friction is evaluated based on the degree of staining of white cloth. There are 5 levels in total. The larger the value, the better the rubbing fastness. 4. Perspiration fastness Perspiration fastness refers to the degree of color fading of dyed fabrics after being soaked in sweat. Since the composition of artificially prepared sweat is different, perspiration fastness is generally tested separately and combined with other color fastness. 5. Washing fastness Washing color fastness refers to the degree of color change of dyed fabrics after washing with detergent. Usually, a gray grading sample card is used as the evaluation standard, that is, the color difference between the original sample and the sample after fading is used for evaluation. Fabrics with poor washing fastness should be dry washed. If wet washing is performed, attention should be paid to the washing conditions, such as the washing temperature should not be too high and the washing time should not be too long. Anything inquiry please contact us as below: AVENO technology co., ltd. Email: sales@avenotester.com
online service
+8615280858852
sales@avenotester.com
sales@avenotester.com
+8615280858852
