+8615280858852
+8615280858852
The introduction of the pilling resistance fuzzing and pilling mechanism of fabric and the test method to evaluate the anti fuzzing and pilling performance of fabric will help manufacturers to consider the source, select appropriate raw materials and manufacturing process, comprehensively consider all aspects of fabric indicators, and achieve the best combination of design, performance, quality an...
Notice! There are new changes in the fuzzing and pilling rating regulations! Come see your fabric felt? With GB / T 4802.4-2020, ISO 12945-1: 2020, ISO 12945-2: 2020, ISO 12945-3: 2020, ISO 12945-3: 2020, ISO 12945-4: 2020, etc., the results of the above standard gaze rating also have Change. 1. The old standard requires the issuance of pilling levels, such as pilling Level 3; 2. The new version o...
1. Equipment (1) TTF Tensile Tester (2) 200LBS or above pull-pound (3) Stopwatch (4) Steel ruler or caliper (5) Temperature/Hygrometer 2 Internal calibration and maintenance of equipment: All equipment is inspected and maintained every three months, and the inspection and maintenance results are recorded in the "Instrument Maintenance Record". 3 Test Conditions (1) Room temperature: 23±2℃, humidit...
Bursting strength is the most advanced method performed on fabrics to measure the strength of a material. It can be defined as the force required to break a woven/knitted fabric under standard conditions by a force applied perpendicular to the plane of the sample. Fabrics are often stressed in all directions during use, so it is necessary to apply actual stress to the material to determine the fab...
ICI mace snag tester applies to rapid determine the snag resistance of fabric, (pull yarn loops from fabric). And suitable for woven and knitted fabrics made by textured yarn, non-textured yarn, and spun yarn, etc. 1. Items to be confirmed before operation: 1) Confirm whether the power supply meets the requirements。 2）Whether the surface of the sample is round。 3）Put the nail hammer around the gui...
Martindale Abrasion Tester is suitable for abrasion resistance test and apparent pilling performance test of woven fabrics, knitted fabrics, non-woven fabrics, decorative materials and coated fabrics. Martindale Abrasion Tester Test Principle: The fabric to be tested is installed in the upper sample holder and rubbed against the abrasive installed on the grinding table, and the friction trajectory...
online service
+8615280858852
sales@avenotester.com
sales@avenotester.com
+8615280858852
