+8615280858852
+8615280858852
Random Tumble Pilling Tester is used to determine the pilling and fuzzing characteristics of textile fabrics under the condition of free rolling friction in the cylinder. During testing, sample continuous, random friction with cork lining in rotation of stainless steel vane. Test time is controlled by timers and audio alarms. Compressed air also can be injected into the test chamber to enhance ove...
1) ICI Pilling and Snagging Tester is packed in a whole box. The wooden box is not allowed to lie on its side during transportation, and it is strictly forbidden to turn the wooden box upside down. 2) During the transportation and unpacking of the ICI Pilling and Snagging Test Chamber, try to prevent shocks or severe vibrations. When unpacking, first remove the box cover, and then remove the four ...
1. Automatic Wascator Shrinkage Tester leakage: Check that the inlet, drain joint or drain valve is properly installed. 2. Abnormal internal gallbladder rotation sound or motionless or show abnormal motor （ALM.M） Check the frequency converter for failure or alarm. Check to see if there is an abnormal jam in the rotating device. 3. The interface shows the inflow anomaly （ALM.I） Check if the water l...
Leather Softness Tester is used to test the softness of different kinds of leather, such as footwear, furniture, cloth, and other kinds of leather, to evaluate whether the softness of leather is uniform or not, or whether the softness of individual leather is different. Do you want to know more about the Leather Softness Tester? Display mode Digital display Load weight 530±10 g Test range 0.1 ~ 10...
Ozone Test Chamber description The content of ozone in the atmosphere is very small, but it is the main factor of rubber cracking. This Ozone Test Chamber simulates and strengthens the ozone condition in the atmosphere, studies the action of ozone on rubber, and quickly identifies and evaluates the anti-ozone aging performance of rubber and the protection of anti-ozonant. Method of performance. Re...
1) Before the ICI Mace Snag Tester experiment, first place a sufficiently large fabric sample to be tested in a temperature of 20 ± 2 ° C and a relative humidity of 60% ± 2% for 24 hours. 2) From the fabric to be tested, parallel warp at a distance of 1/10 of the width, and cut out two pieces of samples with a size of 200mm × 330mm in the weft direction without damage or defects. 3) At the middle ...
online service
+8615280858852
sales@avenotester.com
sales@avenotester.com
+8615280858852
