+8615280858852
+8615280858852
Install of Fryma Fabric Extensiometer 1. Place the Frymer extension meter on a platform at least 1.5m above the ground. 2. One end of the pulley should be placed on the edge of the platform to facilitate the hanging of weights. Operation steps of Frymer Extension and Recovery Meter 1. Install the processed sample on the sample holder. The sample should be as flat as possible to avoid wri...
Install of Fryma Fabric Extensiometer 1. Place the Frymer extension meter on a platform at least 1.5m above the ground. 2. One end of the pulley should be placed on the edge of the platform to facilitate the hanging of weights. Operation steps of Frymer Extension and Recovery Meter 1. Install the processed sample on the sample holder. The sample should be as flat as possible to avoid wrinkles. 2. ...
1 The Martindale Test Machine For Fabric case must be grounded and its grounding resistance should be less than or equal to 1Ω. 2 Do not bump the parts during handling, installation, adjustment and use to avoid mechanical damage and affect the test results. 3 The touch buttons in the Martindale Abrasion Test Equipment control panel can only be pressed with your fingers. Do not use other hard objec...
Digital Tearing Tester is used for testing the tearing strength of all kinds of fabrics (Elmendorf Method), and the tearing resistance of thick paper, plastic cloth, electrical tape, etc. Do you want to know more about the Digital Elmendorf Tearing Tester? Included Standard Accessories Load 5sets (1A, 1B, 3C) Sample template 1pc English operation software 1pc Cable connect to PC 1set Power line &n...
Electronic Tearing Tester is used for testing the tearing strength of all kinds of fabrics (Elmendorf Method), and the tearing resistance of thick paper, plastic cloth, electrical tape, etc. Do you want to know more about the Paper Tearing Tester? Included Standard Accessories 32N load weight 1pc 64N load weight 1pc Sample Template 1pc English operation software 1pc Cable connect to PC 1pc Sp...
1. Use the fiber cutter provided by Aveno company to cut a proper amount of fiber to be tested. 2. Prepare clean glass slides and coverslips required for Fiber Content Analyzer testing. 3. Drop an appropriate amount of glycerin or paraffin oil on the glass slide. 4. Put the cut fibers on the glass slide and stir evenly to spread the fibers evenly. 5. Cover the cover glass and drive out the bubbles...
online service
+8615280858852
sales@avenotester.com
sales@avenotester.com
+8615280858852
