+8615280858852
+8615280858852
1. Before using the 5KN 10KN 20KN strength tester, check whether there is a reliable grounding device. 2. The voltage in the laboratory must be stable. It is best to install a voltage stabilizer in the laboratory. Do not use the Universal Testing Machine (Dual Column) when the voltage is unstable, so as to avoid short-circuiting and burning circuit boards due to unstable voltage. 3. When replacing...
1. Equipment (1) TTF Tensile Tester (2) 200LBS or above pull-pound (3) Stopwatch (4) Steel ruler or caliper (5) Temperature/Hygrometer 2 Internal calibration and maintenance of equipment: All equipment is inspected and maintained every three months, and the inspection and maintenance results are recorded in the "Instrument Maintenance Record". 3 Test Conditions (1) Room temperature: 23±2℃, humidit...
Spray Rating Tester is used to determine the water resistance of any fabrics, which may or may not have been given a water-repellent finish, to surface wetting by water. It is not intended to predict waterproofness, since it does not measure the penetration of water through fabric. 1.SAMPLE PREPARETION Cut off 3 180mm×180mm size smooth sample from the under-test fabric. Sample pre-conditioning: ta...
The design of an instrument not only needs the accuracy of the test results, but also needs to pay attention to the operator's convenience of operation and the result review. Aveno combined the above points to design a Martindale Abrasion Tester that is easy to operate and review the results, and he uses precision components to precisely control the abrasion and pilling movement. The design princi...
Bursting Strength Tester is designed by absorbing the advantages of similar instruments at home and abroad. It adopts touch screen display, pneumatic clamping, external plexiglass protective cover, AC servo drive system, high-speed AD and processor, so that the instrument has the advantages of simple operation, high test accuracy, stable operation, low noise and convenient maintenance. How to main...
The Fabric Water Spray Tester is a product specially designed to determine the moisture resistance of textile or clothing surfaces by spray testing. This tester is suitable for fabrics that have not been waterproofed or treated for water repellency. By comparing the appearance of the sample to descriptive standards and photographs, the operator can use the spray test to provide the spray rating of...
online service
+8615280858852
sales@avenotester.com
sales@avenotester.com
+8615280858852
