+8615280858852
+8615280858852
Fix the sole test piece in the test piece seat of DIN abrasion resistance testing machine, apply certain pressure to the test sole through the test piece seat, and carry out friction forward movement on the rotating drum of DIN abrasion resistance testing machine covered with sandpaper. After a certain distance, measure the weight wear of the sole test piece before and after friction, and calculat...
Random Tumble Pilling Tester is used in the pilling test experiment of textiles. Its purpose is to test the friction resistance of textiles and the physical properties of pilling. It is a necessary test item in textile enterprises. This method is suitable for judging the resistance of fabrics to pilling and other surface defects, such as hairiness, and is suitable for various types of clothing fab...
Yarn Strength Test Machine is used to measure the breaking strength and breaking elongation of single yarns, synthetic filaments and textured yarns of cotton, wool, hemp and core yarns. Do you want to know more about the Single Yarn Strength Tester? 1. Clamp method: Manual clamp, pneumatic clamp (optional) 2. Display mode: LCD display 3. Strength testing range: 0~10000 cN, ±1% 4. Test speed: ...
In life, most people choose to send their precious clothes to dry cleaning, thinking that dry cleaning can not only remove stains, but also maintain the beauty of clothes. In real life, dry cleaning of clothes will also cause discoloration or staining of light-colored parts. Learn about the test method for color fastness to dry cleaning today. What is dry cleaning? Dry cleaning refers to the washi...
What is fabric shrinkage? The yarn buckling occurs during the re-weaving process, so the length or width it occupies in the fabric must be less than its original straightening length, and the percentage that reflects the difference between the two is called weaving shrinkage. They are expressed in terms of warp shrinkage and weft shrinkage. The reason for the fabrics shrinkage The weaving yarns ar...
Preparation of specimens 1. Cut out the required number of square test specimens of 64 ± 1 mm × 64 ± 1 mm from various parts of the material to be tested (no scratches, creases or folds) using the standard cutter or scissors along the direction of warp and the direction of weft. Procedure of Upper and Vamp Material Flexing resistance Tester 1. Method for clamping specimen 1.1. Half fold the specim...
online service
+8615280858852
sales@avenotester.com
sales@avenotester.com
+8615280858852
