+8615280858852
+8615280858852
Bursting Strength Tester is used to determine the expansion force and divergence rate of fabric, woven, knitted fabrics, non-woven, paper and board. Standards Of Bursting Strength Tester ASTM3786-06, ISO2758/13938-1, BS 3424/3137, BS 4768, AS2001.2.4, GB/T 7742, IWSTM 29, EDA NA 80.4-02/80.3-99, NEXT 22 2206, FZ/T60019, JIS L 1018.6.17, BS-2922, FZ/T 60019, FZ/T 01030, JIS L 1018.6.17. AVENO ...
Zipper Rotation Testing Machine is used to determine the torsion resistance of zippers, offer 3 test methods: torsion breaking, angle test and load test. Feature Of Zipper Rotation Testing Machine Three test method: torsion breaking, angle test and load test Touch screen display and with humanization design, low noise, beautiful look and easy to operate. High precision torque sensor with small err...
Since the outbreak of the new coronavirus pneumonia, not only are masks scarce in Hubei Province, but mask resources are also very scarce across the country and the world. For a while, "cannot buy masks" has become a hot topic. The previous masks are common in everyday life. Nothing, but now masks have become a hot out of stock. How can a small mask block the terrible virus, now I will sort out th...
Mask Breathing Resistance Tester is used to test inhalation and exhalation resistance of the mask under specified conditions. Feature Touch screen control, interphone mode, easy to operate Built-in thermal printer to facilitate quick on-site printing of test results High precision differential pressure sensor, digital flowmeter, high precision test Two modes of breath detection and inspiratory det...
Hot Air Seam Sealing Machine is suitable for all kinds of protective clothing, waterproof clothing, waterproof shoes, raincoats, tents and other outdoor products hot pressing waterproof strip. Principle With the pressure principle of hot air nozzle and lower roller, the waterproof sticker strip is attached to the joint to achieve the waterproof sealing effect. Flat mouth air gun, air outlet unifor...
1. The sample is parked in the laboratory environment for more than 8 hours 2. Cut a sample at the flat part of the sample, if it is an insole, it should be cut to the transfer part 3. Remove the load and load shaft from the testing machine 4. Remove the top plate and test fixture 5. Device for the sample: Loosen the fixing ring on the test fixture, remove the sample tablet, place the sample in th...
online service
+8615280858852
sales@avenotester.com
sales@avenotester.com
+8615280858852
