+8615280858852
+8615280858852
1. Always keep the Taber Abrasion Tester clean and tidy by wiping the Taber Abrasion Resistance Tester with cotton cloth. 2. The metallic surface shall be applied with anti-rust oil. 3. Fill lubricating oil for the moving parts at regular intervals. AVENO Machine Recommend: AF46 Taber Abrasion Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skyp...
Leather Lastometer Ball Burst Tester is used to test crack resistance Index of all kinds of vamp, shoe upper material and other leather surfaces. Leather Lastometer Ball Burst Tester’ test principle: fixed specimen circumference then the steel ball as a speed of 12mm/min rises upward from the inner side of the leather, when a crack occurs on the sample surface, record the height of the rise and th...
Safety Glove Cutting Tester also named Blade Cut Resistance Tester, is used to check the protective capability for the protective zone of the safety glove against cutting. Test principle of Blade Cut Resistance Tester Put the sample on the special test set, cutting the sample with a rotating circular blade, the blade reciprocate under a certain load and times, automatic counting and stop after tes...
If the testing salt liquid is not used more than one week, please do not use, so as not to affect the quality of the test. If time interval is long away from the next test, clean laboratory interior after the test, and water emission inside the heating pentrough. Water emission of heating tank --------------- open drain valve. Water emission of isolated sink --------------- Intermedi...
AG11-3 Digital Tearing Tester is AVENO Latest design, used for testing the tearing strength of all kinds of fabrics (Elmendorf Method), and the tearing resistance of thick paper, plastic cloth, textile fabric, electrical tape, etc. The tearing test force range can reach 128N. It with special software can connect to computer, and doing data storage, statistics, charts. AVENO Machine Recommend: AG11...
1. Clean: keep the DIN Abrasion Tester clean anytime, use cotton cloth to wipe the machine abrasion dust before or after test to keep it clean. 2. Rust-proof: regularly spray rust-proof oil on Shoe DIN Type Abrasion Tester metal surface. 3. Lubrication: regularly fill lubricating oil on DIN Abrasion Tester drive parts (normal lubricating oil can be chosen). AVENO Machine Recommend: AF02 DIN Abrasi...
online service
+8615280858852
sales@avenotester.com
sales@avenotester.com
+8615280858852
