+8615280858852
+8615280858852
1. Correction shoes Inserts Flexing Tester items: folding distance and speed. 2. Calibration equipment: height gauge, infrared speed measuring device 3. Calibration cycle: one year 4. Correction steps: a) Verification of endurance distance i. First manually adjust the clamp to the lowest point, use a height ruler to measure the height of the rubber interlayer of the two fixed rods (middle), and re...
1. Before using the 5KN 10KN 20KN strength tester, check whether there is a reliable grounding device. 2. The voltage in the laboratory must be stable. It is best to install a voltage stabilizer in the laboratory. Do not use the Universal Testing Machine (Dual Column) when the voltage is unstable, so as to avoid short-circuiting and burning circuit boards due to unstable voltage. 3. When replacing...
The introduction of the pilling resistance fuzzing and pilling mechanism of fabric and the test method to evaluate the anti fuzzing and pilling performance of fabric will help manufacturers to consider the source, select appropriate raw materials and manufacturing process, comprehensively consider all aspects of fabric indicators, and achieve the best combination of design, performance, quality an...
1. Equipment (1) TTF Tensile Tester (2) 200LBS or above pull-pound (3) Stopwatch (4) Steel ruler or caliper (5) Temperature/Hygrometer 2 Internal calibration and maintenance of equipment: All equipment is inspected and maintained every three months, and the inspection and maintenance results are recorded in the "Instrument Maintenance Record". 3 Test Conditions (1) Room temperature: 23±2℃, humidit...
Bursting strength is the most advanced method performed on fabrics to measure the strength of a material. It can be defined as the force required to break a woven/knitted fabric under standard conditions by a force applied perpendicular to the plane of the sample. Fabrics are often stressed in all directions during use, so it is necessary to apply actual stress to the material to determine the fab...
ICI mace snag tester applies to rapid determine the snag resistance of fabric, (pull yarn loops from fabric). And suitable for woven and knitted fabrics made by textured yarn, non-textured yarn, and spun yarn, etc. 1. Items to be confirmed before operation: 1) Confirm whether the power supply meets the requirements。 2）Whether the surface of the sample is round。 3）Put the nail hammer around the gui...
online service
+8615280858852
sales@avenotester.com
sales@avenotester.com
+8615280858852
