+8615280858852
+8615280858852
1 The Martindale Test Machine For Fabric case must be grounded and its grounding resistance should be less than or equal to 1Ω. 2 Do not bump the parts during handling, installation, adjustment and use to avoid mechanical damage and affect the test results. 3 The touch buttons in the Martindale Abrasion Test Equipment control panel can only be pressed with your fingers. Do not use other hard objec...
Digital Tearing Tester is used for testing the tearing strength of all kinds of fabrics (Elmendorf Method), and the tearing resistance of thick paper, plastic cloth, electrical tape, etc. Do you want to know more about the Digital Elmendorf Tearing Tester? Included Standard Accessories Load 5sets (1A, 1B, 3C) Sample template 1pc English operation software 1pc Cable connect to PC 1set Power line &n...
Electronic Tearing Tester is used for testing the tearing strength of all kinds of fabrics (Elmendorf Method), and the tearing resistance of thick paper, plastic cloth, electrical tape, etc. Do you want to know more about the Paper Tearing Tester? Included Standard Accessories 32N load weight 1pc 64N load weight 1pc Sample Template 1pc English operation software 1pc Cable connect to PC 1pc Sp...
1. Before using the 5KN 10KN 20KN strength tester, check whether there is a reliable grounding device. 2. The voltage in the laboratory must be stable. It is best to install a voltage stabilizer in the laboratory. Do not use the Universal Testing Machine (Dual Column) when the voltage is unstable, so as to avoid short-circuiting and burning circuit boards due to unstable voltage. 3. When replacing...
Manual Laboratory Padder is used to test the liquid content of fabric when textile printing and dyeing, finishing process, and holding uniform rolling surplus rate to make water content stable. Also can used to pull out moisture of the soaked textile, it is a very convenient, simple and effective laboratory test tool. Do you want to know more about the Laboratory Dyeing Padder? Control mode: Manua...
1. Equipment (1) TTF Tensile Tester (2) 200LBS or above pull-pound (3) Stopwatch (4) Steel ruler or caliper (5) Temperature/Hygrometer 2 Internal calibration and maintenance of equipment: All equipment is inspected and maintained every three months, and the inspection and maintenance results are recorded in the "Instrument Maintenance Record". 3 Test Conditions (1) Room temperature: 23±2℃, humidit...
online service
+8615280858852
sales@avenotester.com
sales@avenotester.com
+8615280858852
