+8615280858852
+8615280858852
1. The sample is parked in the laboratory environment for more than 8 hours. 2. Cut a piece of specimen on the flat part of the sample. If it is an insole, it should be cut to the transfer site. Samples should be representative. 3. Remove the load and load shaft from the Martindale Abrasion and Pilling Tester. 4. Remove the top plate and test fixture. 5. Installation of sample: loosen the fixing r...
1.The Martindale Abrasion Tester need to clean on a regular basis to ensure cleanliness. 2.Regularly check if the Abrasion and Pilling Tester abnormal. 3.Please use the Martindale Test Machine according to the instructions, so as not to damage the instrument and affect the life of the instrument. 4.Please put the accessories back to their original position after use to avoid loss. 5.Turn off the p...
Open Martindale Abrasion and Pilling Tester’s power switch, the screen will show following: Press the test to enter the work interface, the screen will show following: (1) When the Martindale Abrasion Tester is not in working state, Click “Times” button to set test times. The setting range is 0~999999 times. (2) When the Martindale Abrasion Tester is not in working state, Click “Speed” button to s...
Please add the lube to the belt pulley axletree and rotating member to make it working well. Please clean the Fabric Pilling Tester face everyday after your test, and you should spray the rust preventing oil regularly. Please check the tightness of the Random Pilling Tester’s belt regularly, and adjust or change the new belt of same standard depending on the circumstance. AVENO Machine R...
1. Always keep the Taber Abrasion Tester clean and tidy by wiping the Taber Abrasion Resistance Tester with cotton cloth. 2. The metallic surface shall be applied with anti-rust oil. 3. Fill lubricating oil for the moving parts at regular intervals. AVENO Machine Recommend: AF46 Taber Abrasion Tester Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skyp...
Infrared Laboratory Dyeing Machine uses thermal infrared heating to achieve dyeing. The performance is stable and reliable, energy-saving and environmentally friendly, no fumes, no need to use glycerin for heat conduction, no need to use cooling water source, saving energy and cost effect is remarkable. Dyeing and color matching experiments; Segmentation, level dyeing, and penetration testing; Seg...
online service
+8615280858852
sales@avenotester.com
sales@avenotester.com
+8615280858852
