+8615280858852
Make sure that the safety catch is locked. Loosen the blade retaining screws to allow the blade retaining plates to be removed, then either turn or replace the blades. Replace the blade retaining plates and tighten the screws. Repeat this procedure for each blade. Note that blades may be rotated until all cutting corners have been used. AVENO Machine Recommend AG26 100CM2 Sample Cutter Contact Us ...
Place the sample on the cutting board making sure that it is flat and smooth, do not stretch it. Place the cutter on the sample and release the safety catch, this is done by withdrawing the head of the catch, turning it through 90 degrees and locating the pin in the two recesses, this allows the blades to become operational. Whilst holding the cutter with one hand, apply pressure to the handle and...
1. Friction head for plastic products, have been finished friction before going out factory, should no gap with stainless steel plate, friction head should be touched directly with sandpaper when uses. It is easy friction head to wear rather than flat. Larger gap with steel plate results in uneve pressure from the samples and impacting on testing results. 2. The speed of friction head has been adj...
Infrared Laboratory Dyeing Machine uses thermal infrared heating to achieve dyeing. The performance is stable and reliable, energy-saving and environmentally friendly, no fumes, no need to use glycerin for heat conduction, no need to use cooling water source, saving energy and cost effect is remarkable. Dyeing and color matching experiments; Segmentation, level dyeing, and penetration testing; Seg...
AATCC Electronic Crockmeter is used to determine the colour fastness of textiles dry or wet rubbing, suitable for coloured fabric, coated, printed and dyed textiles. Product Details AVENO Machine Recommend: AC04 AATCC Electronic Crockmeter Contact Us Now! Sales Dept Tel: +86 15280858852 Email: sales@avenotester.com Skype: sales@avenotester.com Web: www.avenotester.com
1. Dye performance Some water-soluble dyes, such as reactive dyes, contain water-soluble groups that facilitate dye dissolution and dyeing during the dyeing process. Some poorly water-soluble dyes, such as vat dyes, are mechanically padded to the fibers in a suspension state during continuous padding, and are reduced in steam to become water-soluble dye leuco. The fibers are then oxidized, boiled,...